山东食品机械有限公司

注射前，将已配制好的盐水倒入盐水箱中，把肉放置在工作台上，启动盐水泵，手持盐水注射部位，在将注射针刺入肉中的同时打开注射的开关，拔出注射针时应立即关闭注射针。让后根据肉块的大小，按工艺要求的注射孔距，移动注射针至肉块另一位置，进行第二次注射。如次循环往复，直至注射结束。

Before injection, the prepared brine is poured into the salt water tank, and the meat is placed on the worktable. The brine pump is started, and the saline injection part is held. When the injection is injected into the meat, the switch of the injection is opened at the same time. When the needle is pulled out, the injection needle should be immediately closed. After the size of the meat, according to the technical requirements of the injection hole, move the injection needle to another position of the meat, second injections. So again, until the end of injection.